March 14, 2019 at 6:30 AM EDT
<< Back

The ExOne Company Reports 2018 Fourth Quarter Results

  • Q4 record quarterly revenue of $25.3 million; record full year revenue of $64.6 million
  • Q4 record quarterly net income of $2.1 million, $0.13 per share
    • Second half net income of $1.8 million, $0.11 per share
    • Second half adjusted EBITDA* of $4.7 million
  • Gross margin improved to 40.2% in Q4; 32.4% for year
  • Realigned cost structure demonstrates leverage opportunity to drive profitability
  • 2019 goals: revenue growth rate in excess of 2018, full year positive adjusted EBITDA

NORTH HUNTINGDON, Pa.--(BUSINESS WIRE)--Mar. 14, 2019-- The ExOne Company (Nasdaq: XONE) (“ExOne” or the “Company”), a global provider of three-dimensional (“3D”) printing machines and 3D printed and other products, materials and services to industrial customers, reported financial results today for the fourth quarter and year ended December 31, 2018.

S. Kent Rockwell, ExOne’s Chairman and Chief Executive Officer, stated, “We are pleased to have attained our 2018 goal for net income in the second half of the year, achieving $0.11 of earnings per share in the second half. The results of our 2018 global cost realignment initiative announced in June demonstrate production efficiency and operating leverage opportunity. With our focus on profitability, cash flow, and long-term growth, we are especially satisfied with these results despite some customer delays causing lower than expected revenue. Revenue predictability is dependent upon timing of customer actions which, at times, can be difficult for us to forecast with accuracy. However, our customer pipeline remains robust and we have the production capacity to satisfy customer requirements.”

Reflecting on results for the full year of 2018, Mr. Rockwell added:

  • “We reached record revenue of nearly $65 million. That represents about 12% growth over 2017 and a three-year compound annual growth rate of 17%.
  • Machine revenue was up 21%. Non-machine revenue marginally improved, by 2%, impacted by our production service center changes.
  • We generated nearly $21 million of gross profit, 32.4% of sales. That represents about 45% growth over 2017 and a three-year compound annual growth rate of 36%.
  • Focusing on productivity and profitability, we implemented our 2018 global cost realignment initiative, reaching approximately $7 million of net annualized run rate cost reductions.
  • We invested in further advancement of the capabilities of our 3D printing technology, expanding our machine and material offerings. In conjunction with the Formnext additive manufacturing trade fair in Frankfurt, Germany in November, we announced our newest fine powder direct 3D printer system, the X1 25PRO™.

We continue to aggressively develop our machine technology and additional materials to satisfy the growing demands of the industrial marketplace for our binder jetting technology applications, while maintaining efficiency with our investment spend.”

 

Fourth Quarter and Full Year Revenue – Driven by Machine Revenue Growth

 
    Quarter Ended           Year Ended      
(in millions)   December 31,           December 31,      
Revenue by Product Line

 

2018   2017     % Change       2018   2017   % Change
3D Printing Machines   $ 19.0   75 %   $ 12.9   64 %     47 %     $ 36.4   56 %   $ 30.0   52 %     21

%

3D Printed and Other Products,

Materials and Services

 

  6.3   25 %     7.3   36 %     (13

%)

      28.2   44 %     27.7   48 %     2 %
Total Revenue

 

$ 25.3   100 %   $ 20.2   100 %     25 %     $ 64.6   100 %   $ 57.7   100 %     12 %
                                               

Consolidated revenue for the 2018 fourth quarter grew 25% over the prior-year fourth quarter.

Machine revenue grew 47% to $19.0 million in the fourth quarter of 2018. Revenue growth was primarily driven by an increase in machine volume, as well as favorable product mix. Twenty-eight machines were sold in the 2018 fourth quarter, of which 14 were indirect and 14 were direct printing machines. This compares favorably with 16 machines sold in the 2017 fourth quarter, consisting of nine indirect and seven direct printing machines.

Non-machine revenue (3D printed and other products, materials and services) was down 13% to $6.3 million in the fourth quarter of 2018, compared with the fourth quarter of the prior year. The decrease was primarily due to a lower volume of printing projects at the Company’s direct and indirect service centers, including the impact of the Company’s exit from its Houston facility.

For the year, consolidated revenue grew 12% to $64.6 million, compared with 2017. Machine revenue was up 21% to $36.4 million and non-machine revenue grew 2% to $28.2 million. Machine revenue included sales of 56 machine units in 2018, up 37% from 41 units in 2017.

Given the long sales cycle and significance of a machine’s average selling price relative to total revenue, fluctuations in machine-sale revenue vary from quarter to quarter. ExOne does not believe that such quarter-to-quarter fluctuations are necessarily indicative of larger trends.

 

Fourth Quarter Operations – Realizing Production Efficiency and Operating Leverage

                 
($ in millions, except per-share amounts)   Q4 2018   Q4 2017   Change   % Change
Gross profit   $ 10.2     $ 6.7     $ 3.5   53%
Gross margin     40.2 %     33.0 %        
Operating income (loss)   $ 2.5     $ (1.9 )   $ 4.4   NM
Net income (loss)   $ 2.1     $ (2.0 )   $ 4.1   NM
Diluted EPS   $ 0.13     $ (0.12 )   $ 0.25   NM
                 

Gross profit grew 53% to $10.2 million in the 2018 fourth quarter, resulting in a 40.2% gross margin, compared with 33.0% in the prior-year fourth quarter. The 2018 quarter benefited from operating leverage on higher revenue, as well as a reduction in fixed costs resulting from the 2018 global cost realignment initiative.

R&D expense of $2.3 million for the quarter was down $0.4 million, or 16%, compared with the 2017 fourth quarter, with the reduction resulting primarily from efficiencies gained from the 2018 global cost realignment initiative, while continuing our strong progress in advancing the Company’s technology.

SG&A expense of $5.4 million for the 2018 fourth quarter was down $0.4 million, or 6%, compared with the prior-year fourth quarter, also benefiting from the 2018 global cost realignment initiative.

The 2018 fourth quarter net income was $2.1 million, or $0.13 per share, compared with a $2.0 million net loss, or $0.12 loss per share, in the fourth quarter of 2017. This positive net income was driven by the Company’s ability to drive growth and manage costs.

Adjusted earnings before interest, taxes, depreciation and amortization (“Adjusted EBITDA”)1,a non-GAAP measure, was $4.2 million in the 2018 fourth quarter, compared with a $0.1 million loss in last year’s fourth quarter.

 

2018 Review – Demonstrates Annual Operating Leverage Opportunity on Revenue Growth

                 

($ in millions, except per-share
amounts)

  2018   2017   Change   % Change
Gross profit   $ 20.9     $ 14.4     $ 6.5   46 %
Gross margin     32.4 %     24.9 %        
Operating loss   $ (13.0 )   $ (19.7 )   $ 6.7   34 %
Net loss   $ (12.7 )   $ (20.0 )   $ 7.3   37 %
Diluted EPS   $ (0.78 )   $ (1.25 )   $ 0.46   37 %
                 

Gross profit grew to a record $20.9 million, resulting in a 32.4% gross margin in 2018, compared with 24.9% in 2017. The 2018 period benefited from higher revenue and an improved cost base for the second half as well as a decrease in net inventory obsolescence charges, partially offset by a reduction in gains from property and equipment disposals. Additionally, the 2017 period was impacted by the sale of Exerial™ machines at a breakeven contribution margin.

R&D expense was $10.7 million in 2018 compared with $9.9 million in 2017, with the increase primarily due to higher employee-related costs, which were reduced in the second half of 2018 following enactment of the 2018 global cost realignment program.

SG&A in 2018 was $23.2 million compared with $24.2 million in 2017. The decrease was driven by lower equity-based compensation and a reduction in amortization expense associated with intangible assets, partially offset by higher employee-related costs which were reduced in the second half following enactment of the 2018 global cost realignment initiative.

The net loss was $12.7 million, or $0.78 per share, in 2018, compared with $20.0 million, or $1.25 per share, in 2017.

Adjusted EBITDA*, a non-GAAP measure, was a $6.5 million loss in 2018 and a $10.9 million loss in 2017.

*See the attached tables for important disclosures regarding the Company’s use of Adjusted EBITDA, a non-GAAP measure (indicated by * where used in this release), as well as a reconciliation of net income (loss) (the most directly comparable GAAP measure) to Adjusted EBITDA for the quarters ended December 31, 2018 and 2017 and the six months ended December 31, 2018.ExOne management believes that, when used in conjunction with other measures prepared in accordance with accounting principles generally accepted in the United States (“GAAP”), Adjusted EBITDA assists in the understanding of its financial results.

Capitalization – Operating Cash Flow Usage Supports Growth

Cash, cash equivalents and restricted cash as of December 31, 2018 were $9.1 million, compared with $22.2 million at December 31, 2017. There were no borrowings outstanding on the Company’s $15 million credit facility.

Cash used for operating activities during 2018 was $11.8 million, compared with $9.7 million in 2017. The $2.1 million increase was driven by higher working capital, primarily due to timing of payments from customers and investments in inventory to support growth, partially offset by improved operating results.

Cash capital expenditures were $1.3 million and $1.0 million in 2018 and 2017, respectively. In 2019, the Company expects cash capital expenditures of $1 million to $2 million.

2019 Goals – Increase Revenue Growth Rate and Generate Positive Adjusted EBITDA

Mr. Rockwell concluded, “Given the strength of our pipeline and customer interest in our technology, we are targeting revenue growth at increasing rates over each of the next several years. We believe that our new cost structure positions us well for operating leverage that will lead to positive adjusted EBITDA for the full year of 2019 and beyond. As is typical for the first quarter of our year, we expect a slow start to 2019 and we currently estimate about a 35/65 revenue split between the first half and second half of the year.”

Webcast and Conference Call

ExOne will host a conference call and live webcast on Thursday, March 14, 2019 at 8:30 a.m. Eastern Time. During the conference call and webcast, management will review the financial and operating results for the 2018 fourth quarter and full year, along with ExOne’s corporate strategies and outlook. A question-and-answer session will follow. The teleconference can be accessed by calling (201) 689-8470. The webcast can be monitored on the Company’s website at www.investor.exone.com/.

A telephonic replay of the conference call will be available from 11:30 a.m. Eastern Time on the day of the teleconference through Thursday, March 21, 2019. To listen to a replay of the call, dial (412) 317-6671 and enter the conference ID number 13686221, or access the webcast replay via the Company’s website, where a transcript will also be posted once available.

About ExOne

ExOne is a global provider of 3D printing machines and 3D printed and other products, materials and services to industrial customers. ExOne's business primarily consists of manufacturing and selling 3D printing machines and printing products to specification for its customers using its installed base of 3D printing machines. ExOne’s machines serve direct and indirect applications. Direct printing produces a component; indirect printing makes a tool to produce a component. ExOne offers pre-production collaboration and print products for customers through its network of ExOne Adoption Centers (“EACs”) and Production Service Centers (“PSCs”). ExOne also supplies the associated materials, including consumables and replacement parts, and other services, including training and technical support that is necessary for purchasers of its 3D printing machines to print products. The Company believes that its ability to print in a variety of industrial materials, as well as its industry-leading volumetric output (as measured by build box size and printing speed) uniquely position ExOne to serve the needs of industrial customers.

Safe Harbor Regarding Forward Looking Statements

This news release may contain forward-looking statements within the meaning of the Private Securities Litigation Reform Act with respect to the Company’s future financial or business performance, strategies, or expectations. Forward-looking statements typically are identified by words or phrases such as “trend,” “potential,” “opportunity,” “pipeline,” “believe,” “comfortable,” “expect,” “anticipate,” “current,” “intention,” “estimate,” “position,” “assume,” “outlook,” “continue,” “remain,” “maintain,” “sustain,” “seek,” “achieve,” as well as similar expressions, or future or conditional verbs such as “will,” “would,” “should,” “could” and “may.”

The Company cautions that forward-looking statements are subject to numerous assumptions, risks and uncertainties, which change over time. Forward-looking statements speak only as of the date they are made and the Company assumes no duty to and does not undertake to update forward-looking statements. Actual results could differ materially from those anticipated in forward-looking statements and future results could differ materially from historical performance.

In addition to risk factors previously disclosed in the Company’s SEC filings, including its Annual Report on Form 10-K, the following factors, among others, could cause results to differ materially from forward-looking statements or historical performance: the Company’s ability to consistently generate operating profits; fluctuations in the Company’s revenues and operating results; the Company’s competitive environment and its competitive position; ExOne’s ability to enhance its 3D printing machines and technology and develop new 3D printing machines; the Company’s ability to qualify more industrial materials in which it can print; demand for ExOne’s products; the availability of skilled personnel; the impact of loss of key management; the impact of market conditions and other factors on the carrying value of long-lived assets; the Company’s ability to continue as a going concern; the impact of customer specific terms in machine sale agreements on the period in which the Company recognizes revenue; risks related to global operations including effects of foreign currency; the adequacy of sources of liquidity; the amount and sufficiency of funds for required capital expenditures, working capital, and debt service; dependency on certain critical suppliers; nature or impact of alliances and strategic investments; reliance on critical information technology systems; the effect of litigation, contingencies and warranty claims; liabilities under laws and regulations protecting the environment; the impact of governmental laws and regulations; operating hazards, war, terrorism and cancellation or unavailability of insurance coverage; the impact of disruption of the Company’s manufacturing facilities, PSCs or EACs; the adequacy of ExOne’s protection of its intellectual property; and expectations regarding demand for the Company’s industrial products, operating revenues, operating and maintenance expenses, insurance expenses and deductibles, interest expenses, debt levels, and other matters with regard to outlook.

These and other important factors, including those discussed in the Company’s Annual Report on Form 10-K, may cause the Company’s actual results of operations to differ materially from any future results of operations expressed or implied by the forward-looking statements contained therein. Before making a decision to purchase ExOne common stock, you should carefully consider all of the factors identified in its Annual Report on Form 10-K and other SEC filings that could cause actual results to differ from these forward-looking statements.

FINANCIAL TABLES FOLLOW.

 

The ExOne Company

Statement of Consolidated Operations

(in thousands, except per-share amounts)

   

 

     

 

     
   

Quarter Ended

  %  

Year Ended

  %
   

December 31,

 

Change

 

December 31,

  Change
     

2018

     

2017

         

2018

     

2017

     
Revenue   $ 25,305     $ 20,189     25 %   $ 64,644     $ 57,744     12 %
Cost of sales     15,143       13,533     12 %     43,703       43,362     1 %
Gross profit     10,162       6,656     53 %     20,941       14,382     46 %
Gross margin     40.2 %     33.0 %         32.4 %     24.9 %    
Research and development     2,270       2,690     (16 %)     10,744       9,909     8 %
Selling, general and administrative     5,439       5,817     (6 %)     23,194       24,155     (4 %)
      7,709       8,507     (9 %)     33,938       34,064     (0 %)
Operating income (loss)     2,453       (1,851 )   NM       (12,997 )     (19,682 )   34 %
Interest expense     75       25     200 %     254       94     170 %
Other expense (income) ̶ net     192       69     178 %     (744 )     203    

NM

 
      267       94     184 %     (490 )     297     NM  
Income (loss) before income taxes     2,186       (1,945 )   NM       (12,507 )     (19,979 )   37 %
Provision for income taxes     108       15     620 %     160       38     321 %
Net income (loss)

 

$ 2,078     $ (1,960 )   NM     $ (12,667 )   $ (20,017 )   37 %
Net income (loss) per common share:                        
Basic   $ 0.13     $ (0.12 )   NM     $ (0.78 )   $ (1.25 )   37 %
Diluted   $ 0.13     $ (0.12 )   NM     $ (0.78 )   $ (1.25 )   37 %
Weighted average shares outstanding ̶ basic     16,234       16,104           16,176       16,062      
Weighted average shares outstanding ̶ diluted     16,264       16,104           16,176       16,062      
                                         

NM:Not Meaningful

                                       
                                         
     
The ExOne Company
Consolidated Balance Sheet
(in thousands, except per-share and share amounts)

 

   

December 31,

   

2018

 

2017

Assets        
Current assets:        
Cash and cash equivalents   $ 7,592     $ 21,848  
Restricted cash     1,548       330  
Accounts receivable – net     6,695       8,647  
Inventories – net     15,930       15,430  
Prepaid expenses and other current assets     2,438       1,710  
Total current assets     34,203       47,965  
Property and equipment – net     41,906       46,797  
Intangible assets – net           62  
Other noncurrent assets     1,573       736  
Total assets   $ 77,682     $ 95,560  
Liabilities        
Current liabilities:        
Current portion of long-term debt   $ 144     $ 137  
Accounts payable     4,376       4,291  
Accrued expenses and other current liabilities     6,049       6,096  
Deferred revenue and customer prepayments     2,343       8,282  
Total current liabilities     12,912       18,806  
Long-term debt – net of current portion     1,364       1,508  

Other noncurrent liabilities

    631       37  

Total liabilities

    14,907       20,351  
Contingencies and commitments        

Stockholders' equity

       

Common stock, $0.01 par value, 200,000,000 shares authorized, 16,234,201

(2018) and 16,124,617 (2017) shares issued and outstanding

    162       161  
Additional paid-in capital     175,214       173,718  
Accumulated deficit     (101,853 )     (89,186 )
Accumulated other comprehensive loss     (10,748 )     (9,484 )
Total stockholders' equity     62,775       75,209  
Total liabilities and stockholders' equity   $ 77,682     $ 95,560  
       
The ExOne Company
Statement of Consolidated Cash Flows

(in thousands)

       
   

Year Ended

   

December 31,

   

2018

 

2017

Operating activities        
Net loss   $ (12,667 )   $ (20,017 )
Adjustments to reconcile net loss to net cash used for operations:        
Depreciation and amortization     5,503       6,278  
Equity-based compensation     968       2,456  
Amortization of debt issuance costs     75       6  
Deferred income taxes           1  
Provision (recoveries) for bad debts – net     58       (64 )

Provision for slow-moving, obsolete and lower of cost

or net realizable value inventories – net

    1,022       2,056  
Gain from disposal of property and equipment – net     (51 )     (325 )

Changes in assets and liabilities, excluding effects of foreign

currency translation adjustments:

 

Decrease (increase) in accounts receivable

    1,637       (1,733 )

(Increase) decrease in inventories

    (3,441 )     357  
Increase in prepaid expenses and other assets     (335 )     (856 )
Increase in accounts payable     195       2,017  
Increase in accrued expenses and other liabilities     181       445  
Decrease in deferred revenue and customer prepayments     (4,988 )     (294 )
Net cash used for operating activities     (11,843 )     (9,673 )
Investing activities        
Capital expenditures     (1,327 )     (987 )
Proceeds from sale of property and equipment     98       3,706  
Net cash (used for) provided by investing activities     (1,229 )     2,719  
Financing activities        
Payments on long-term debt     (142 )     (137 )
Payments on capital leases     (17 )     (78 )
Proceeds from exercise of employee stock options     529       147  
Debt issuance costs     (265 )      
Net cash provided by (used for) financing activities     105       (68 )
Effect of exchange rate changes on cash, cash equivalents, and restricted cash     (71 )     1,045  
Net change in cash, cash equivalents, and restricted cash     (13,038 )     (5,977 )
Cash, cash equivalents, and restricted cash at beginning of period     22,178       28,155  
Cash, cash equivalents, and restricted cash at end of period   $ 9,140     $ 22,178  
         
Supplemental disclosure of cash flow information        

Cash paid for interest

  $ 169     $ 87  

Cash paid for income taxes

  $ 103     $ 5  
         

Supplemental disclosure of noncash investing and financing activities

       

Transfer of internally developed 3D printing machines from inventories

to property and equipment for internal use or leasing activities

  $ 2,194     $ 2,868  

Transfer of internally developed 3D printing machines from property and equipment

to inventories for sale

  $ 1,042     $ 3,042  
Property and equipment included in assets held for sale   $ 822     $  
Property and equipment included in accounts payable   $ 79     $ 64  
Property and equipment included in accrued expenses and other current liabilities   $     $ 108  
Property and equipment acquired through financing arrangements   $ 14     $ 48  
                 
 

The ExOne Company

Additional Information

(Unaudited)

 

   

Quarter Ended

 

Year Ended

   

December 31,

 

December 31,

   

2018

 

2017

  2018  

2017

3D printing machine units sold:                

Direct

  14   7   30   18

Indirect

  14   9   26   23
    28   16   56   41
                 
     
The ExOne Company

Adjusted EBITDA Reconciliation

(in millions)

(Unaudited)

           

 

       
   

Quarter Ended

 

Six Months Ended

  Year Ended
   

December 31,

 

December 31,

 

December 31,

   

2018

 

2017

 

2018

 

2018

 

2017

Net income (loss)   $ 2.1   $ (1.9 )   $ 1.8     $ (12.7 )   $ (20.0 )
Interest expense     0.1     0.0       0.1       0.2       0.1  
Provision for income taxes     0.1     0.0       0.1       0.2       0.0  
Depreciation and amortization     1.4     1.3       2.7       5.5       6.3  
Equity-based compensation     0.3     0.4       0.6       1.0       2.5  
Other expense (income) ̶ net     0.2     0.1       (0.6 )     (0.7 )     0.2  
Adjusted EBITDA   $ 4.2   $ (0.1 )   $ 4.7     $ (6.5 )   $ (10.9 )
                     

ExOne defines Adjusted EBITDA (earnings before interest, taxes, depreciation and amortization) as net income (loss) (as calculated under accounting principles generally accepted in the United States (“GAAP”)) plus interest expense, provision for income taxes, depreciation and amortization, equity-based compensation, and other expense (income) - net. Use of Adjusted EBITDA, which is a non-GAAP financial measure, as defined under the rules of the U.S. Securities and Exchange Commission, is intended as a supplemental measure of ExOne’s performance that is not required by, or presented in accordance with, GAAP. The presentation of Adjusted EBITDA is not intended to be a substitute for, and should not be considered in isolation from, net income (loss) reported in accordance with GAAP. The Company’s presentation of Adjusted EBITDA should not be construed to imply that its future results will be unaffected by unusual or non-recurring items.

The Company believes Adjusted EBITDA is meaningful to its investors to enhance their understanding of ExOne’s financial results. Although Adjusted EBITDA is not necessarily a measure of the Company’s ability to fund its cash needs, the Company understands that it is frequently used by securities analysts, investors and other interested parties as a measure of financial performance and to compare ExOne’s performance with the performance of other companies that report Adjusted EBITDA. ExOne’s calculation of Adjusted EBITDA may not be comparable to similarly titled measures reported by other companies.

 

Source: ExOne

For more information:
Brian Smith
Senior Vice President -
Corporate Development
(724) 765-1350
brian.smith@exone.com

Deborah K. Pawlowski / Karen L. Howard
Kei Advisors LLC
(716) 843-3908 / (716) 843-3942
dpawlowski@keiadvisors.com / khoward@keiadvisors.com

 

Some test content
Shareholder Tools